Fiber testing equipment offers accuracy and ensure to measure signal loss, attenuation, and dispersion in your fiber optic systems.
Deviser AE1001 OTDR with OPM, LS, and VFL for FTTx Network Testing
Deviser AE1001 OTDR with OPM, LS, and VFL for FTTx Network Testing
1310/1550 nm, 26/24 dB
Key Benefits
• Ultra-portable, lightweight OTDR for FTTx networks
• 4.3” LCD touchscreen is visible in high- or low-light conditions
• Fast dual-wavelength test generates results in ≤5 seconds
• Excellent stability and repeatability
• Power-packed ~2-lb meter runs continuously for over 4 hours
• Save >160k OTDR traces with 16 GB of data storage
GST Extra
EXFO AXS-115 handheld OTDR
AXS – Compact OTDR Series
POINT-TO-POINT (P2P) LINKS, LAST-MILE INSTALLATION AND TROUBLESHOOTING
Ultra-portable and fit-for-purpose, the AXS-115 brings the essential capabilities of a state-of-the-art OTDR in a sleek design to the field
KEY FEATURES
Rugged and ultra-portable, featuring a 4-inch high-visibility outdoor
touchscreen
All-day battery autonomy
Dynamic range of 32/30 dB
Short dead zones: 0.8/3.5 m event dead zone (EDZ) /
attenuation dead zone (ADZ)
Onboard link map simplifying OTDR trace interpretation
Dual wavelengths with automated macrobend detection
Onboard PDF reporting
- GST Extra
EXFO MaxTester 715B – last-mile OTDR
POINT-TO-POINT (P2P) LINKS, LAST-MILE INSTALLATION AND TROUBLESHOOTING
- Handy, lightweight, powerful, tablet-inspired design
- 7-inch, outdoor-enhanced touchscreen – the biggest in the handheld industry
- 12-hour autonomy
- Dead zones: EDZ 1 m, ADZ 4 m
- Dynamic range of 30/28/28 dB
- Rugged design built for outside plant
- iOLM-ready: intelligent and dynamic application that turns complex OTDR trace analysis into a one-touch task
- GST Extra
Fujikura Splicing Machines 33s
Splicing machines
- Simultaneous Fiber Processing: Capable of simultaneous fiber preparation, stripping, cleaving, and setting.
- Speedy Heating: Faster heating times for quicker splicing.
- User-Friendly Design: An intuitive interface makes operation straightforward.
- Movable LCD Monitor: A movable LCD monitor for added convenience during splicing.
- Removable Battery: The removable battery ensures uninterrupted use.
- Compact Footprint: Its smaller size saves space while maintaining top performance.
- Efficient Fiber Transport: Reduced fiber transportation time streamlines the splicing process.
- Included Carrying Case: Comes with a carrying case (CC44) for easy transport and protection.
INNO i4 Fusion Splicer
- Splicing Time: Quick Mode:4 sec(Avg.)/SM Mode:5 sec(Avg.)
- Heating Time: 13 sec(45mm, 60mm slim)
- Battery: 3500mAh (up to 200 splice + heat)
- Electrode Life 6000 Arcs Discharges
- Display 4.3″ Color LCD Display, Full Touch Screen & Keypad Operation.
- 2 Bright LEDs for Dark Environment
- Typical Splice Loss: SM:0.03dB / MM:0.01dB / DS:0.05dB / NZDS:0.05dB / G.657:0.03dB
- Fusion Splicer INNO i4 at Best Offer Price
- GST Extra
Live Optical Fiber Identifier
Wavelength |
800-1700nm
|
Brand |
Hogny
|
Display Type |
Color LCD
|
Measurement range |
-50~+26dB
|
Minimum Order Quantity |
1 Piece
|
Sumitomo S1V Fusion Splicer (Splicing Machine)
Easy to operate Sumitomo S1V Fusion Splicer and unique technology helps to handle all types of fiber optic cable used in FTTH.
Sumitomo S1V splicing machine is specially designed for FTTH connections, making it an ideal choice for service providers and technicians involved in expanding broadband access to homes. S1V is the world’s smallest, user-friendly and most light weight splicing machine in India. S1V- Compact, Smart & Tough. It means easy to carry, easier, smart technology and easy operation under worst conditions. S1V Fiber Optic Splicing Machine has several notable features are –
1. Splice & heat Cycles may vary depending on the battery status and the operating environment.
2. Long Life Battery for Approx 250 splice & heat Cycle
3. Low Splicing Loss
4. Supported advance Technology
5. Electrode Life-6000 Arc display Charges
6. 200 images / 10,000 splice data (internal memory only), 50,200 / 20,000 (With 16GB SD card)
7. Weight: 0.9kg (without Battery), 1.2kg (with Battery BU-17 )
G&T 0715 Fiber Cleaver
Product Name:
|
G&T 0715 Cheap High Quality Easy To Operate Fiber Optic Cleaver With Rb-0711 Blade With 32000 Cuts And 16 Cutting Points
|
Applicable bare fiber diameter:
|
125μm
|
Applicable fiber core :
|
single core
|
Fiber cutting length:
|
5~20+mm
|
Applicable parameters of the fixture:
|
250μm / 900μm / 3*2 cable
|
Average cutting angle:
|
≤0.8°
|
Blade life:
|
320000+ times (1000 times * 16 Position * Adjustable Height 2-3 times)
|
Dimension:
|
94W*92D*52H(mm)
|
Weight:
|
185g
|
Fiber Fixture:
|
3&1
|
packing box:
|
instruction manual, Allen wrench
|
G&T High Precision cutting single core fiber tool optical fiber clever
Product Specification:
Model | G&T |
Product name | High Precision cutting single core fiber clever |
Application | FTTH FTTB FTTX Network |
0.9mm fiber:10~16mm | |
Optical Fiber Diameter | 125μm |
Suitable for Optical Fiber Type | 0.25&0.9mm |
size | 58*55*52 (mm) |
weight | 280g |
Service life of blade | Around 48000 fibers |
Cutting end face of blade | 24 point |
Golden High Precision Optical Fiber Cleaver HF-08
Product Specification:
Model | HF-08 |
Cutting angle | ≤0.5° |
Cutting length | 0.25mm fiber:9~16mm |
0.9mm fiber:10~16mm | |
Optical Fiber Diameter | 125μm |
Suitable for Optical Fiber Type | 0.25&0.9mm |
size | 63W×56D×56H(mm) |
weight | 280g |
Service life of blade | Around 48000 fibers |
Cutting end face of blade | 24 point |
HO Fiber Optic Cable Stripper
HO Fiber Optic Cleaver GR 27 High Precision
Product description
- This high precision optical fiber cleaver is used for fiber cutting and especially more focusing on FTTx field.
- The Ultra-fine Tungsten Steel Blade provides up to 48,000 times cleaves by easy and simple 16 blade spots.
- It is installed with fiber holder which is applicable to 0.25mm 0.9mm 3.0mm fibers. It also has an automatic collector for fiber shards and off cuts.